-40%
YOUR Tascam 464 Serviced and Modded For 8T Post Fader Out - Return Shipping Box
YOUR Tascam 464 Serviced and Modded For 8T Post Fader Out - Return Shipping Box

YOUR Tascam 464 Serviced and Modded For 8T Post Fader Out - Return Shipping Box

$ 2.64

Availability: 100 in stock
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller
  • Refund will be given as: Money Back
  • Condition: Shipping Box
  • Restocking Fee: No
  • Item must be returned within: 30 Days

    Description

    NOT A UNIT FOR SALE - BOX ONLY - THE
    MOD COST 100.00
    plus return shipping cost.
    This box you are buying in advance for when we send your unit back to you after we mod it for 4 out - (your choice direct out or post fader). Send a message for more info.
    How it works: you send us
    YOUR
    unit, we send it back in about a week
    Add the following per request:
    - Gear C installed (the only one that fails) (40.00 installed)
    - Belt replaced (30.00)
    - Pinch roller cleaned (5.00)
    - Heads cleaned and demagnetized (5.00)
    - Transport lubed (5.00)
    - Transport servo switch cleaned (5.00)
    - Inspection solder joints,  plugs and bus wire  connections (5.00)
    Package deal total: 200.00 plus return shipping.
    Mod Technical Description
    :  Simultaneous post fader output of 1-4  tracks via RCA terminals. Result:
    Adding four post fader outputs will allow you to output 8 tracks of audio into your DAW or 8 track reel to reel,  4 tracks out with EQ and Fader control, along with the factory 4 direct out the unit already has, resulting in 8 tracks out during mixdowns.  Allowing the best of both worlds during final mixdowns in your DAW or PC and adding "fatter analog tone" since the tracks can be doubled.
    Mod Features:
    -  8  track
    simultaneous
    uploading capability (4 Post Fader/EQ + 4 Direct)
    - Guaranteed transparent, built with 100% analog circuitry
    - Does not change or interfere with any other function of the 464
    - High quality components used for the mod
    Note:
    Our tech secures an Associates of Applied Science Degree in Electronics from Kirkwood College and has repaired
    the 488's since their introduction into the market in the early 90's.
    LOOK
    : Please be sure you test your unit to make sure everything functions as it should
    before
    you send it. If there are any issues please contact us first and explain what they are. Replacing gear C and the belt may repair some issues, but not a guarantee, so please let us know what issues if any your unit has
    before
    sending. Thank you.
    Thanks for looking, any questions just message us!