Hobart Undercounter Dishwasher with Energy Recovery Hot Water Sanitizing

Description

Hobart Undercounter Dishwasher with Energy Recovery Hot Water Sanitizing
Quickly and efficiently wash dishes and glassware with this Hobart LXeR-2 Advansys undercounter dishwasher. This hot water sanitizing dishwasher can keep up with the high demands of your kitchen while working efficiently to cut down on costs. With additional features and advanced technology, this dishwasher provides convenience to your work flow and allows you to focus on other important tasks in the kitchen. STANDARD FEATURES Racks per hour LXeR Light: 30; Normal: 24; Heavy: 13 LXePR Light: 38; Normal: 29; Heavy: 14 0.62 gallons of water per rack – LXeR 1.14 gallons of water per rack – LXePR Hot water or chemical sanitation units available Steam Elimination and Energy Recovery (LXeR model only) PuriRinse cycle (Potable water rinse to remove chemical residue) (LXePR model only) NSF Certified pot and pan cycle on heavy cycle (LXeR model only) Low chemical alert indicators Sense-A-Temp™ booster heater capable of 70 rise, provided on LXeR models Chemical pump “auto-prime” Advanced Service diagnostics Clogged wash arm sensing Custom cycle selection – light, normal, heavy Automated delime cycle – includes booster deliming Deep drawn stainless steel tank Microcomputer, top mounted controls with advanced digital cycle/temperature display Revolving upper and lower anti-clogging wash arms Snap in revolving upper and lower rinse arms Removable stainless steel scrap screen Corrosion resistant pump Energy Saver mode Automatic pumped drain 17" door opening Dirty water indicator Automatic fill Detergent, rinse aid and delime pumps standard (plus sanitizer pump on chemical machine) Electric tank heat Two dishracks – one peg and one combination type Customizable “advansys” button to select favorites function Auto clean cycle washes down inside of machine at shutdown SPECIFICATIONS DESIGN: Front opening, equipped for installation in either freestanding or undercounter-type operations. CONSTRUCTION: 300 series stainless steel tank, door and top panel. PUMP: Centrifugal-type, integral with motor, horizontally mounted. Pump capacity 38 gpm. MOTOR: Single phase, furnished for all electrical specifications. Factory sealed lubrication. Inherent overload protection with auto reset. WASH AND RINSE CYCLE: Complete automatic type, controlled by solid-state electronics. Cycle may be interrupted any time by opening door. Cycle continues when door is closed. • Initial cycle fills wash tank, to be recirculated each wash cycle. Some wash water is drained off before rinse cycle. Rinse cycle refreshes wash water and tank heat. RINSE PUMP: Powered by a single phase motor, the rinse pump is made of high strength engineered composite material. BLOWER: The blower is a 60mm x 300mm tangential wheel powered by a 2-pole single phase motor for quiet and reliable operation, LXeR only. CONDENSER COIL: The condensing system uses a tube and fin coil constructed of copper and corrosion resistant aluminum. The condenser coil allows for energy recovery from waste heat in the moisture laden air that would normally escape into the environment after a dishwashing cycle, LXeR only. RINSE AND SANITATION: • LXeR: Sanitation is accomplished by means of a built-in booster heater designed to raise temperature of water to a minimum of 180°F from an incoming water temperature of 55°F. • LXePR: Sanitation is accomplished by injection of proper amount of sodium hypochlorite solution (liquid bleach) into final rinse water to achieve a minimum of 50PPM sanitizing solution. Injection of sodium hypochlorite is accomplished by a built-in sanitizing chemical pump. Minimum required hot water temperature is 120°F. – Potable water rinse to remove chemical residue. – To be used with sanitizer approved for use with post sanitizing rinse CHECK SANITIZER CONCENTRATION: PuriRinse must be off (hold Wash button for 5 seconds). Verify that there is sufficient chemical supply. Run cycle and use test trips on wetted surface of glasses after cycle is complete. If concentration is below minimum required, contact your local Hobart Service office. ENERGY RECOVERY: Heat energy is recovered from the condensation of vapors in the chamber at the end of each cycle. This pre-heats the water for the next rinse cycle from 55°F up to 140°F. PUMPED DRAIN: Machine automatically drains water through a built-in pump. Maximum 38" drain height permitted. ELECTRIC BOOSTER HEATER: 4.9 KW electric booster with Sense-A-Temp™ technology adequately sized to raise 55°F inlet water to 180°F, with the aid of the energy recovery system. RACKING: Machines accommodate racks from 10" x 20" to 20" x 20". Also accepts 16" x 18" cafeteria trays. NOTE: Certain materials, including silver, aluminum and pewter are attacked by Sodium Hypochlorite solution in the chemical sanitizing mode of operation.
Hobart Undercounter Dishwasher with Energy Recovery Hot Water Sanitizing
Quickly and efficiently wash dishes and glassware with this Hobart LXeR-2 Advansys undercounter dishwasher.
This hot water sanitizing dishwasher can keep up with the high demands of your kitchen while working efficiently to cut down on costs. With additional features and advanced technology, this dishwasher provides convenience to your work flow and allows you to focus on other important tasks in the kitchen.
STANDARD FEATURES
Racks per hour
LXeR
Light: 30; Normal: 24; Heavy: 13
LXePR
Light: 38; Normal: 29; Heavy: 14
0.62 gallons of water per rack – LXeR 1.14 gallons of water per rack – LXePR
Hot water or chemical sanitation units available
Steam Elimination and Energy Recovery (LXeR model only)
PuriRinse cycle (Potable water rinse to remove chemical residue) (LXePR model only)
NSF Certified pot and pan cycle on heavy cycle (LXeR model only)
Low chemical alert indicators
Sense-A-Temp™ booster heater capable of  70 rise, provided on LXeR models
Chemical pump “auto-prime”
Advanced Service diagnostics
Clogged wash arm sensing
Custom cycle selection – light, normal, heavy
Automated delime cycle – includes booster deliming
Deep drawn stainless steel tank
Microcomputer, top mounted controls with advanced digital cycle/temperature display
Revolving upper and lower anti-clogging wash arms
Snap in revolving upper and lower rinse arms
Removable stainless steel scrap screen
Corrosion resistant pump
Energy Saver mode
Automatic pumped drain
17" door opening
Dirty water indicator
Automatic fill
Detergent, rinse aid and delime pumps standard (plus sanitizer pump on chemical machine)
Electric tank heat
Two dishracks – one peg and one combination type
Customizable “advansys” button to select favorites function
Auto clean cycle washes down inside of machine at shutdown
SPECIFICATIONS
DESIGN
: Front opening, equipped for installation in either freestanding or undercounter-type operations.
CONSTRUCTION
: 300 series stainless steel tank, door and top panel.
PUMP
: Centrifugal-type, integral with motor, horizontally mounted. Pump capacity 38 gpm.
MOTOR
: Single phase, furnished for all electrical specifications. Factory sealed lubrication. Inherent overload protection with auto reset.
WASH AND RINSE CYCLE
: Complete automatic type, controlled by solid-state electronics. Cycle may be interrupted any time by opening door. Cycle continues when door is closed. • Initial cycle fills wash tank, to be recirculated each wash cycle. Some wash water is drained off before rinse cycle. Rinse cycle refreshes wash water and tank heat.
RINSE PUMP
: Powered by a single phase motor, the rinse pump is made of high strength engineered composite material.
BLOWER
: The blower is a 60mm x 300mm tangential wheel powered by a 2-pole single phase motor for quiet and reliable operation, LXeR only.
CONDENSER COIL
: The condensing system uses a tube and fin coil constructed of copper and corrosion resistant aluminum.  The condenser coil allows for energy recovery from waste heat  in the moisture laden air that would normally escape into the  environment after a dishwashing cycle, LXeR only.
RINSE AND SANITATION
:
•
LXeR:
Sanitation is accomplished by means of a built-in booster heater designed to raise temperature of water to a minimum of 180°F from an incoming water temperature of 55°F.
•
LXePR:
Sanitation is accomplished by injection of proper amount of sodium hypochlorite solution (liquid bleach) into final rinse water to achieve a minimum of 50PPM sanitizing solution. Injection of sodium hypochlorite is accomplished by a built-in sanitizing chemical pump. Minimum required hot water temperature is 120°F.
– Potable water rinse to remove chemical residue.
– To be uséd with sanitizer approved for use with post sanitizing rinse
CHECK SANITIZER CONCENTRATION:
PuriRinse must be off (hold Wash button for 5 seconds). Verify that there is sufficient chemical supply. Run cycle and use test trips on wetted surface of glasses after cycle is complete. If concentration is below minimum required, contact your local Hobart Service office.
ENERGY RECOVERY
: Heat energy is recovered from the condensation of vapors in the chamber at the end of each cycle. This pre-heats the water for the next rinse cycle from 55°F up to 140°F.
PUMPED DRAIN
: Machine automatically drains water through a built-in pump. Maximum 38" drain height permitted.
ELECTRIC BOOSTER HEATER:
4.9 KW electric booster with Sense-A-Temp™ technology adequately sized to raise 55°F inlet water to 180°F, with the aid of the energy recovery system. RACKING: Machines accommodate racks from 10" x 20" to 20" x 20". Also accepts 16" x 18" cafeteria trays.
NOTE: Certain materials, including silver, aluminum and pewter are attacked by Sodium Hypochlorite solution in the chemical sanitizing mode of operation.
×
×
×
×
×
×
Buy now and save!
Tell a friend
Watch now
Postage info
Click the Postage tab above the listing description for more info
FREE Postage
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
Peerless CE131PE Electric Countertop Pizza Oven
Peerless C131P Gas Countertop Pizza Oven with Pizza Stones - 30,000 BTU
Amana RCS10TS Commercial Microwave Oven Medium Volume - 120V, 1000W
Avantco W50 12" x 20" Full Size Electric Countertop Food Warmer - 120V, 1200W
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Restauranium
Postage
Shipping is FREE for this item
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
eBay integration
by