Hobart LXER-1 High Temp Rack Undercounter Dishwasher - (30) Racks/hr, 208-240v/1

Description

Hobart LXER-1 High Temp Rack Undercounter Dishwasher - (30) Racks/hr, 208-240v/1ph
IT RETAILS FOR ABOUT 8900 DOLLARS
SHIPPING CAN BE ARRANGED
Using only 0.62 gallons of water per rack, the Hobart LXER-1 Advansys dishwasher can clean 30 racks per hour on its light wash setting. For more soiled wares, it features normal and heavy wash cycles, and operators can adjust the settings using top-mounted controls. To purge the unit of damaging buildup, it features an automatic deliming cycle, and a low-chemical indicator alerts users when replenishment is needed. As an undercounter model, this unit holds 20-inch by 20-inch racks and measures 23
15
⁄
16
inches wide by 26
13
⁄
16
inches deep by 32
1
⁄
2
inches high.
Built to support high-volume use, the Hobart LXER-1 undercounter dishwasher features a deep-drawn stainless steel tank and a corrosion-resistant pump. A stainless steel scrap screen traps food debris, and it can be removed, rinsed off, and replaced. To optimize sanitation and performance, it’s equipped with a dirty-water indicator and a sensor that detects clogs in the wash arm. Upon shutdown, it executes an automatic wash cycle of the machine’s interior. This unit fills automatically and features an automatic pumped drain to remove water after each cycle.
Product Details
For undercounter placement
Light wash cycle: 30 racks per hour
Normal wash cycle: 24 racks per hour
Heavy wash cycle: 13 racks per hour
Uses 0.62 gal. of water per rack
Accommodates standard 20-in. x 20-in. racks
Deep-drawn stainless steel tank
Corrosion-resistant pump
Automatic deliming cycle
Stainless steel scrap screen is removable
Automatic fill
Energy-saver mode
Dirty-water indicator
Low-chemical alert indicators
Senses clogged wash arm
Top-mounted controls with advanced digital cycle and temperature display
Automatic pumped drain
Steam elimination and energy recovery
Advanced service diagnostics
Rinse aid, detergent, and delime pumps
Automatic clean cycle washes inside of machine upon shutdown
17-in. door opening
Recommended incoming water temperature: 55-80 degrees F
Ideal minimum water operating temperature: 150 degrees F
Ideal minimum rinse operating temperature: 180 degrees F
Dimensions & Utilities
23
15
⁄
16
in. W x 26
3
⁄
4
in. D x 32
1
⁄
2
in. H
WEIGHT 185 LBS