Automotive Manual Engine Oil Extractor Transfer Pump Hand Oil Suction Pump 2L

Description

Note:
It can not change the brake oil ,gasoline and other corrsosive fluid.
The oil pump is used to change oil ,water and other liquid on cars,trucks,motorcycles and boats quickly and easily.It is tiny and durable,easy for carry.Suitable for DIY small maintenance.
Specification:
Item Type: Manual Oil Suction Pump
Capacity: 2L
Hose Diameter: Approx. 5mm / 0.2in, 6mm / 0.2in
Connection Hose Diameter:8mm
Pressure Range:up to -300MPA
Applicable Models: Universally Used in All Cars, Trucks and Boats
Oil Change Steps:
1.First warm up the car,driving for 20 minutes or idling, and then cool down for 10 minutes.
2. Assemble the tool, select the appropriate size of the oil pipe and insert it into the oil dipstick hole.
3.Put the oil pipe into the liquid surface to the best position,should not be too long or too short, otherwise it cannot be pulled out.
4.After pumping oil, dispose of waste oil, slowly pull out the oil pipe, wash it and store it for next use.
Package List:
1 x Bottle
1 X5mm oil tube
1x 6mm oil tube
1x 8mm extention oil tube
1 x Manual Pump