(2) Rockville APM6B 6.5" Powered USB Studio Monitors+Stands+Pads+Mic+Headphones

Description

Car Audio & Video
Pro Audio
Marine Audio
Lighting
Karaoke
Home/Portable Audio
Package: Pair of Rockville APM6B 6.5" 2-Way 350 Watt Powered USB Studio Monitor Speakers in Black + Pair of Rockville RVSM1 Heavy Duty Near-Field Studio Monitor Stands w/ Adjustable Height for Use in any Studio Environment + Pair of Rockville RRS190S High Density Foam Studio Monitor Isolation Pads 7.5" x 9.5" + Rockville RCM PRO Professional Studio/Recording Condenser Microphone + Rockville PRO-M50 Studio Headphones+Detachable Coil Cable+Case+Extra Ear Pad
Click Thumbnails to Enlarge
Condition and Warranty
Condition:
BRAND NEW IN ORIGINAL PACKAGING
Warranty:
1 YEAR AUDIOSAVINGS
Product Description
Package Includes:
(1) Pair of Rockville APM6B 6.5" 2-Way 350W Active/Powered USB Studio Monitor Speakers
(1) Rockville RVSM1 Pair of Near-Field Studio Monitor Stands w/ Adjustable Height
(1) Pair of Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles
(1) Rockville RCM PRO Studio/Recording Condenser Microphone w Samsung Capacitors
(1) Rockville PRO-M50 Studio Headphones+Detachable Coil Cable+Case+Extra Ear Pad
How to Set Up Your APM Series Speakers:
Video of APM6B:
Unboxing video of APM6B:
The Rockville APM6 Active Studio Monitor Comes in Pairs and each monitor will be bi-amped. What this means is that there is a separate amp for the highs and a Separate amp for the lows! Each speaker has 175 watts peak output power and 67.5 watts RMS giving you a total of 350 watts peak and 175 watts RMS per pair. We spent a lot of time developing the most premium studio monitors we ever built! I am very pleased and excited to talk to you guys about what we did to make these speakers sound as good as they do. If you are an audiophile you will find what we did to be quite amazing. Keep in mind, the only reason our price point is not 300 % higher is because you are buying manufacturer direct. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process. There is a lot to talk about so I will break it down into sections.
Description of the enclosure:
We chose a wooden enclosure as opposed to a plastic enclosure. Your studio is made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood. We do not bother with cheap particleboard material when we want to make the best speakers. The thickness is 0.5” around and the front board is a full 1” thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality for a studio.
Every studio or computer room should look beautiful. We believe speakers should enhance the look of a room. We make these speakers in 3 beautiful finishes. Painted black, painted white, and wood finish. We use “baking paint” made for wood surfaces. It is long lasting and the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color to make sure it is not only beautiful but also elegant as well to improve the appearance of your studio or room. We kept all the controls on the back of the speaker, which will keep the speaker looking very modern and elegant. The rear port is built to perfect spec to enhance the sound. The tweeter has a curved front bezel to make the highs crystal clear and distortion free.
Amplifier and Speaker Components Details:
To get the most efficiency we use a class “D” amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal what’s in the guts of the speaker. We feel differently. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use ADAU 1701 for audio processing and TPA3116 for amplification. These are both known to be best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these IC’s. Most people do not know brand names that make circuits; but these are the most famous and reliable in the industry. Only very high-end manufacturers like us use these components.
For highs, we have Ferro fluid enhanced 1.5" neodymium silk dome tweeters with metal grill protection. If you are an audiophile I am sure you have tested and love the sound of silk dome tweeters. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without worrying about melting and blowing the tweeter. The highs on these sound really good! I cannot wait for you all to hear it in person, because I cannot describe how good these sound! You really need to listen to them in person.
We use a 6.5” woofer. This will out-perform a regular 6” or 5” woofer any day! The bass sounds amazing on these! Very clear and punchy! The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today. It is strong and puts out a great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortions. They sound better than foam surrounds in my opinion, which is why we went with rubber. The computer optimized electronic crossover network supplies amazing sounding highs, lows, and mids. Basically it filters out unwanted frequencies from each component so that each speaker plays the right frequencies so that the speaker can go loud without distorting. We use very high-grade crossover filters in our speakers. The specially wounded voice coils produce accurate response along the entire frequency spectrum. We developed the speakers with the most optimized magnet structure, cone, and cabinet space with the goal of reproducing the sound to play back exactly the way it was recorded!
Added benefits:
The rear-firing port is shaped and designed by sound engineers to reduce port turbulence and deliver distortion free top sound quality!
Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). But you may ask why am I talking about glue? Well, actually, the glue on speakers is of the upmost importance. If the glue does not hold up, the speaker will be done and blow. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine that can secure the glue in place. If the glue can handle more heat than your speaker can handle more power!
Thick “Wadding” protects the inside of the speaker cabinet. This can be seen if the speaker cabinet is removed. Basically, wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound more clear, and at the same time protects all the parts inside the speaker. This material is also a fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best speaker!
Inputs and Outputs and Rear Panel Controls:
As I mentioned earlier, we kept all the controls on the rear of the unit to make the speaker look clean and modern. The volume control, bass, and treble controls are all found on the rear of the unit.
These Monitors have all your standard studio inputs and outputs such as a ¼” and XLR combo input jack, RCA input, 3.5MM headphone output. We also added a USB port. The reason we did this is because instead of having to use the 3.5MM or 1/4" TRS jack, you can now directly select the speakers as an output on your computer without using an interface! And you will get true stereo sound!
Features:
Rockville APM6B 6.5" 2-Way 350 Watt Active/Powered USB Studio Monitor Speakers in Black (Pair)
RMS:
175 Watt
Two-Way Active Studio Monitor Speaker System
Quad Amp Design:
Each Driver Features Frequency Specific Independent Amplifiers
Enclosure is made of top quality MDF wood. Our enclosure is not particleboard, it is true high-grade MDF! The enclosure is 0.5” thick while the front board of it is a full 1” thickness to give you the ultimate best sound quality!
Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board
We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers!
Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room
The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
The port is built to the perfect spec to enhance the sound
Full Range Class “D” Amplifier Circuitry with Auto-Switching Power Supply
LED Power on Indicator on Rear Panel
Ferro Fluid Enhanced 1.5" Neodymium Silk Dome Tweeter With Metal Grill Protection
Tweeter has 1” voice coil diameter
Curved Front Bezel Design Eliminates Standing Wave Distortion
Injection Molded Polypropylene Cone Woofer
Rubber woofer surrounds increases sound quality and eliminates unwanted distortions
Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids
Rear-Firing Port Shaped and Designed by Sound Engineers to Reduce Port Turbulence and Deliver Distortion Free Top Sound Quality!
We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded!
Specially Wound Voice Coils Produce Accurate Response along Entire Frequency Spectrum
Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple to understand terms; the glue on speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place
Thick “Wadding” protects inside the speaker cabinet – Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clearly, and it also protects all the parts inside the speaker. This material is also a fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer!
World-class top of the line audiophile grade components! We use ADAU 1701 for audio processing and TPA3116 for amplification. These are both known to be best in class circuit designs. These components also are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these IC’s. Most people do not know brands that make circuits, but these are famous in that industry and known to be the best of the best. Only very high end products use these components
110 Volt compatible with SMPS technology – Normally most items have a transformer. Our SMPS technology switches voltages more efficiently and adheres to all international efficiency standards!
Every Speaker in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards
We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long long time!)
Transducer Production Line to Make the SPL Performance Stable
One Complete Pair with Mater / Salve Output Connection with Included Noise Rejection Cabling
Includes a noise rejection cable to connect the 2 speakers together (This is a proprietary cable we use that connects the 2 speakers together without any unwanted noise). We also use a special cable tip that will not allow the user to plug the cable in backwards. The cable locks in secure and tight
Comes in 3 beautiful finishes:
Painted Black, Painted White, Vinyl Wood Finish
Inputs / Outputs / Controls:
Volume control
Bass/Treble Control -4dB to 4dB (allows you to adjust high and low frequency independently)
¼” and XLR combo input jack
High Speed USB jack
RCA input
3.5mm Headphone output
Details:
Certification:
CE and RoHS Compliant
Amplifier:
Class D, very efficient amplifier with top components!
(ADI--ADAU1701, TI--TPA3116, SMPS)
System Impedance:
Tweeter 6 Ω
Woofer 4 Ω
Signal to noise ratio:
90dB (Maximum output with THD+1<1%, A-weight)
Max SPL:
102dB @ 1w/1m
THD:
0.10%
Frequency Response:
50Hz - 20 kHz
350 Watts peak output per pair
175 Watt RMS output per pair
Each speaker produces 175 watts peak and 87.5 watts RMS
Input voltage:
120V
Components:
1" neodymium silk dome tweeter and 6.5" woofer with rubber surrounds and polypropylene cone
Product Dimensions in Inches (Single):
(W*H*D): 8.5” inch x 12.6” inch x 10” inch
Shipping Dimensions in Inches (For pair boxed):
(W*H*D): 25.35” x 16.38” x 12.2” inch
Net Weight (Pair):
22 LBS
Shipping Weight (Pair):
26 LBS
Includes 8.5 foot speaker linking cable and power plug
Input Impedance (Ohms):
10K Ohm Balanced
System Volume:
(-30dB to +6dB)
Owner’s Manual
How to Set Up your RVSM1:
Video of RVSM1:
These heavy-duty Near-Field monitor stands are designed with home and project recording studios in mind. The height is adjustable for listening while sitting or standing, and locks in place with a security pin. Three rubber pads on the bottom of the base keep this stand stable on any surface. The entire stand breaks down into four pieces for easy storage and travel.
Includes:
(2) Near-Field Monitor Stands
Features:
Studio Monitor Stands (Pair)
Adjustable Height
Steel Construction
Nylon clutch for adjusting
EVA Pad on top to eliminate unwanted vibrations
Triple enforced steel base with ultimate sturdiness
Black Color
Weight capacity: 80 lbs.
Adjustable height Range: 33-45 inches
Base: 17.7 x 17.7 x 17.7 inches
Top Plate: 9.05 x 9.45 inches
Tube Diameter: 1.5 inch- 1.37 inch
Owner’s Manual
Video of RRS190S:
Description:
The Rockville RRS190S is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music.  These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors.
Isolate your speakers!
Rockville isolation pads are designed to acoustically isolate your studio monitors. They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers’ sound to become inaccurate, unfocused and lose their “musical transparency." The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.
How to get maximum performance from your Monitors!
Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems “shock absorbers”.  Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. You spent good money on your studio monitors, now go the extra mile to make them sound their best.
Rockville Studio Isolation Pads Feature:
Easiest and affordable way to improve your studio monitors sound
Decouples your studio monitors from desktops and monitor stands for accurate reproduction
Each package contains 2 Isolation Pads - enough for 2 studio monitors
2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
Supports up to 100 lbs., so they can isolate a variety of studio gear
Handsome charcoal gray color
Decouple your monitors for super-accurate sound
What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations don’t get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the “coupled” vibrations, will be heard giving you false sound reproduction. But because these “coupled” vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By “decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.
Perfectly position your monitors
Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning.
The most affordable way to improve the sound of your studio monitors
Features:
Rockville RRS190S: Monitor Isolation Pads
3 Angle High Density Foam
7.5" x 9.5"
High quality, High Density Foam
Eliminates vibrations and unwanted noises in your studio
Price is for (2) pads which accommodates (2) speakers
How to Setup a Rockville Condenser Microphone with Your Computer:
Video of RCM PRO:
What's in the Box:
(22 gauge, 10 feet) XLR to XLR Cable - To connect to the phantom power input on your mixer or interface
(22 gauge, 10 feet) 3.5mm to XLR Cable - To connect the microphone to your computer
Metal Shock Mount
Large Wind-Screen/Pop-Filter
Owners Manual
Warranty Card
Description of RCM PRO:
Introducing, the Rockville RCM PRO, our newest high-quality, professional studio/recording condenser microphone! With it's large diaphragm it provides smooth, natural sound and low noise, it also delivers great bass, mids, and highs on all of your recordings. This microphone is very sensitive to incoming sounds to give you the best possible sound! In addition, it includes a 25mm cartridge that allows for a bigger pickup area to pick up incoming sound. The cartridge is the most important aspect that determines the sound quality, and the RCM Pro has one of the best quality cartridges available for any microphone under 0. This microphone sounds better than other name brand microphones that cost twice the price!
The body of the microphone is made of a special zinc metal material. The super strong construction prevents noises from shocks and vibrations. This is especially important when recording loud music including drums and bass. The microphone head is made of strong, high quality steel and features a one-piece microphone head design. Most microphones will have a microphone head that is 2 pieces glued together. Our one-piece microphone head ensures longer life, and better durability. In addition, it helps to eliminate unwanted vibrations that may occur. This microphone has two capacitors (22μ50V and 47μ16V). We used Samsung capacitors from Korea, which are the highest quality capacitors on the market. These are important to help stabilize the voltage so that your recordings are consistent throughout, even if there are sudden changes in the volume or frequency ranges. We compared this microphone to the 3 most famous brands of microphones and the RCM PRO outperformed similar microphones that sell for over double the price!
Features:
Rockville RCM PRO Professional Studio/Recording Condenser Microphone
Best Applications: Home-Studio, Recording Studio, Broadcasting, Podcasts, Live Performances, and much more!
Large diaphragm for smooth, natural sound and low noise
25mm Large Cartridge - Allows For Bigger Pickup Area
Two Large Capacitors: 22μ50V and 47μ16V
Large Diaphragm - Provides Smooth Natural Sound, and Great Bass, Mids, & Highs
High SPL Handling and Wide Dynamic Range
Cardioid Polar Pattern Reduces Pickup of Sounds From Sides and Rear, Reducing Unwanted Noise
Element: Fixed-charge back plate, permanently polarized condenser
Microphone Head is Made of High Quality Steel featuring One-Piece Head Design
Microphone Body Is Made of Special Zinc Metal Material - Prevents Noise From Shock and Vibrations
Frequency Response: 20Hz - 20 kHz
Open Circuit Sensitivity: -30dB ±2dB (0dB = 1V/Pa @ 1 kHz)
Impedance: 100 Ohms
Equivalent Noise Level: ≤ 23 dB A (IEC581-5)
Maximum Input Sound Level: 142dB SPL (THD ≤ 1.0% @ 1 kHz)
Electrical Current: ≧500Ua
Noise: 20dB SPL
Dynamic Range (Typical): 124 dB, 1 kHz @ Max SPL
Signal-to-Noise Ratio: 74 dB, 1 kHz @ 1 Pa
PCB Layout: Surface Mount
Fixed Crossover Filter Cutoff Frequency: 50Hz - 16 kHz
Power Requirements: 48V DC Phantom Power
Output Connector: 3-Pin XLR
Product Weight: 0.74 Lbs
Product Height: 7.44" inches
Shipping Weight: 3.32 Lbs
Shipping Dimensions: 13.98" x 7.87" x 3.15"
Includes:
PRO-M50 headphones
Detachable cable
Soft suede and  leather ear cushions (interchangeable)
Leather hard travel protective case
Gold plated ¼” adapter
Video of PRO-M50:
Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.
The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51” coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼” adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.
Amazing sound quality will make these your go-to headphones whether in the studio or out and about!
Features:
Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
Professional High-Definition Studio Headphones
40mm Neodymium drivers
Ergonomically designed swivel ear cups
Supreme sound isolation
Accurate sound reproduction
Minimal bleed
Sturdy and durable steel headband and arms
Soft leather headband cover
Interchangeable leather and soft suede ear cups covers included
Detachable 51” coil cable made of 100% Oxygen Free Copper (158” fully extended)
Gold plated 3.5mm connector
Gold plated ¼” adapter
Hard leather carrying case
Stainless steel headband frame and moving arms are durable and long-lasting
Specifications:
Style: Closed-Back
Design: Circumaural
Transducer Type: Dynamic
Driver: 40MM
Sensitivity: 97±3dB
Impedance: 32ohm
Frequency Response:10Hz – 25KHz
Max. Power: 600MW
Rating Power: 260MW
Net Weight:290g (with cable)
Return Policy
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 1 YEAR
If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:
We will send you a
pre-paid shipping label
to replace the item for a brand new one.
We will send you a
pre-paid shipping label
to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
If you are returning a
working item
in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note
items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You
MUST notify us within 48 hours
if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return.
All returns require a RMA# to be returned back to our facility.
Item Code: APM6B+RVSM1+RRS190S+RCM PRO PACK 2
Home
/
About Us
/
Contact Us
/
Returns
/
FAQ's
Copyright © 2016
Audio Savings
, All rights reserved.  |
eBay Template Design